ECITB approved Technical test including a theory test and a practical task
TMJI 18: Hydraulic Tension Flange Joint
Successfully use the appropriate tools and equipment to dismantle, inspect flanges and report faults, prepare, assemble and tension a bolted connection using hydraulic tensioning equipment as per the specified drawing and within set tolerances.
TMJI 19: Hydraulic Torque Flange Joint
Use the appropriate tools and equipment to dismantle, inspect flanged joint components and report faults, prepare, assemble and tighten a bolted connection using hydraulic torque equipment as per the specified drawing and within set tolerances.
TMJI 20: Hydraulic Torque Clamp
Successfully use the appropriate tools and equipment to dismantle, inspect clamp connector components and report faults, prepare, assemble and tighten clamp connector joint using hydraulic torque equipment to a specified drawing and within set tolerances.
Maximum Number 1 person.
Duration No time limit but as a guide, 3 – 4 hours for each TMJI should be sufficient.
Technical Test Pre-Requisite In order to complete all TMJI modules, delegates must have completed all stage 1 training which includes:
Delegates will also need to complete stage 2 workplace training. They must have completed the ECITB Work Based Task Assignment log-books giving evidence of on the job experience. The workbooks must be signed off by a supervisor, line manager or a person with responsibility for the final approval and quality assurance for the relevant tasks.
Please Note: ECITB MJI Approved Course ‘Training Certificates’ which are received upon successful completion of MJI10, MJI18 and/or MJI19 are valid for a 12-month period only for Stage 3 technical testing application purposes. These certificates must also be supported by Stage 2 ECITB MJI ‘work based task assignment(s)’ completed within the same 12-month period. If the 12-month training to technical testing period elapses, the full MJI process must be attended again from Stage 1.
Certification On successful completion of the course candidates will receive a TMJI ECITB Certificate.
Additional Information Meeting the needs and expectations of service users is of the highest priority to our staff. Therefore if you have any concerns or wish to make a comment about the service please contact: info@NETA.co.uk